The hottest plastic manufacturing industry in Xinj

  • Detail

The plastic manufacturing industry in Xinjiang has a strong growth momentum

in recent years, the plastic manufacturing industry in Xinjiang has shown a sustained and strong growth momentum, and has become a strong growth industry in Xinjiang's industrial economy

it was learned from the 2013 Xinjiang plastic industry working conference that the plastic products industry, as the pillar industry of Xinjiang light industry, has now formed a relatively complete plastic industry system, including product processing, resin synthesis, production of special resins and modified materials, recycling and recycling of waste plastics, scientific research and development, etc. "In recent years, the average annual growth rate of Xinjiang's plastic industry has reached more than 20%, higher than the average industrial growth rate of the autonomous region in the same period, and is also among the best in Xinjiang's light industry. Among the 38 listed companies in Xinjiang, more than 10 companies, including Xinjiang Tianye Group, Tianli hi tech, Zhongtai chemical, are involved in the production of plastic raw materials or products." Liu Qi, party secretary and director of the light industry management office of the autonomous region, said

among all kinds of plastic products in Xinjiang at present, agricultural plastic products account for the largest proportion, and their output accounts for about 70% of the total output of plastic products. Among them, agricultural plastic water-saving equipment such as plastic mulch, drip irrigation belts and agricultural pipes account for more than 90% of the total amount of agricultural plastic products, and their total output and agricultural use area are at the national advanced level, especially drip irrigation products and technologies based on water-saving equipment are in a leading position. By the end of 2012, Xinjiang had produced 686000 tons of all kinds of plastic water-saving equipment, an increase of more than 60% over 2010, which is another industry bright spot after mulching film and PVC door and window profiles

according to the data, there are more than 1000 drip irrigation belt production enterprises in Xinjiang, with more than 4500 drip irrigation belt production lines. Small and micro enterprises continue to perform prominently in this industry. For example, the output of drip irrigation belts of Ili, Tacheng, Hami, Bozhou and BINGTUAN enterprises has increased rapidly in the past year, and their output growth rate has reached more than 100%

under the guidance of the national policy of promoting new building materials and urbanization, building plastic products have also achieved rapid development in Xinjiang, ranking second in terms of scale, efficiency, technology, equipment and so on. Representative enterprises include PetroChina profile, Tunhe profile, Xilong geotechnical new material and other enterprises. After many years of downturn, packaging plastic products have shown signs of rising again in recent years, and advantageous enterprises such as PetroChina pipe industry have emerged, which has effectively promoted the development of packaging plastic products in Xinjiang. "However, compared with the whole country, there is still a large gap in the plastic industry in Xinjiang. The total output of plastic products in Xinjiang accounts for only 1% - 1.5% of the country, and there are still problems such as unreasonable product categories and structures, nonstandard market order, and low overall benefits of the industry." Liu Qi said

what needs special attention is that at present, the quality and technical level of agricultural plastic products is relatively low. Mulching film is the most traditional agricultural plastic products, but it has remained in the state of "ordinary film" for 30 years. "Special mulching films with different crop characteristics and special functions have not been well developed and applied. Although the unified inspection qualification rate of mulching films has reached about 95% over the years, the long-standing thickness index is unqualified; as a landmark product of plastic water-saving equipment, the quality of drip irrigation belts is even more worrying, and its unified inspection qualification rate is only 71% this year." Kongdehai, Secretary General of the plastic Association of the autonomous region, said. According to the survey of the plastic Association, there is a certain difference in the material selection of parts and components only in drip irrigation belt in Xinjiang. There are more than 1000 production units. So many enterprises are crowded in this narrow market, and their business conditions can be imagined

kongdehai believes that the plastic industry in Xinjiang should accelerate the integration and improvement of the current policies, form a linkage working system between various departments, improve policy efficiency, and guide and ensure the sustainable and healthy development of the agricultural plastic water-saving equipment industry in Xinjiang. At the same time, we should guide enterprises to integrate and restructure under the framework of market mechanism through measures such as policy, capital, industry access and market access, so as to pay equal attention to both characteristics and scale, and walk out of the strange circle of low-level repetition and vicious competition

according to kongdehai, the plastic industry in Xinjiang is still an industry with extensive development space and potential. During the "Eleventh Five Year Plan" period, the elongation of materials is generally high, and the average annual growth rate of the plastic industry in Xinjiang is as high as 17%. According to the 12th Five Year Plan, by 2015, the total output of plastic products in Xinjiang will exceed 2million tons and the output value will exceed 2.5 million yuan, an increase of 1.4 times and 1.6 times respectively compared with 2010, of which agricultural plastic water-saving equipment products will reach the scale of 1million tons

note: the reprinted content is indicated with the source. The reprint is for the purpose of transmitting more information, which does not mean that the previous medical market agrees with its views or confirms the authenticity of its content

Copyright © 2011 JIN SHI